What Are the Precautions for Installing a Diaphragm Pressure Gauge?

On pipes with various equipment, the pressure inside the diaphragm pressure gauge can be measured, but if installed incorrectly, the accuracy of the pressure measurement may be affected. Therefore, when installing a diaphragm pressure gauge for a device, not only must pay attention to finding a suitable installation location, but also pay attention to other issues. Let's look at the things you should pay attention to when installing a diaphragm pressure gauge.

1. The diaphragm pressure gauge is installed in the correct position

When installing a high-quality and low-cost diaphragm pressure gauge, care should be taken to select a suitable location, which not only facilitates the staff to observe the readings on the gauge, but also provides convenience for future cleaning and maintenance. In addition, there is no heat source and strong vibration near the installation location of the diaphragm pressure gauge, which does not affect the reading of pressure detection.

2. The installation angle of the diaphragm pressure gauge should be correct

Generally speaking, the diaphragm pressure gauge should be installed in a position perpendicular to the pipeline, but if due to other factors, the diaphragm pressure gauge must be installed at a higher level, and the angle of the diaphragm pressure gauge should be kept slightly forward for easy viewing. Tilt, but the tilt angle should not be too large and should be kept within 30 degrees.

3. Install buffer elbow for diaphragm pressure gauge

In order to avoid the adverse effect of condensed water on the diaphragm pressure gauge, a section of elbow for buffering should be installed in front of the diaphragm pressure gauges, so that the compressed air can directly rush into the diaphragm pressure gauge, causing a certain degree of damage.

Through the above introduction, we can see that although the volume of the diaphragm pressure gauge is not large, its function is not small, so when installing the diaphragm pressure gauge with low energy consumption, the correct method must be followed to avoid errors in the future installation process. The bad use effect caused, and the damage of the diaphragm pressure gauge.

Our company focuses on pressure gauges, thermometers, and project engineering products. We serve a wide range of industries including: petrochemical, pharmaceutical, mining, food processing, medical, OEM applications.

Our products are sold to the global market, and customers are from Asia, Europe, North America, South America, Australia, etc. Our quality policy is "there is no survival without quality, and no development without good reputation". If necessary, welcome to consult.